Component counter COUNTY-S-EVO

DOWNLOAD:

Motorized counter spec :
This machine works in a simple way by counting the holes on the tape.
It can operate in two different ways:
Totalizer: components are counted from a zero reference, tape feed is motorized and the counter automatically stops at the tape end,
to prevent loss of the total.
Preset mode: the desired component number is keyed on the keyboard and the counter automatically stops when it reaches the corresponding component.
All functions are easy to operate by the help of interactive messages on the graphic display.
In the count screen are always visible:
– Counting direction
– Pitch number (holes per component)
– Working mode (Totalizer, Preset or Rewind)
– Name of the operator
– Components counted
– Date & Time or the last barcode reading.

Technical features :
Display: 6 digits high efficiency leds
Maximum counting speed: 220 pc/sec (1 piece per hole)
Accuracy: ±1 piece
Holes per component: divider from 1 to 99 (and multiplier 2,3,4 for 0402, 0201 and 01005 components)
Maximum tape height: 56mm
Maximum reel diameter: 400mm (standard configuration), 650mm (with 8301.150 support)
Display: blue LCD with led backlight 160×104 pixel, visible area 74x46mm
Adjustable speed control
Step by step mode (1 component at a time)
Empty pocket check (optional)
Barcode reader input
Serial connection for label printer or PC
Selection of the operator (10 operators can be memorized with 8 alphanumerical chars everyone)
Internal clock (1 week backup)
Datalogger that stores the last 500 counting data
Memory storage for subtotals
2 side handles for easy transport.

Empty Pocket Check
SMD reels sometimes have missing components that most counters cannot detect. The County/S EVO equipped with EPC (model 8301.133 and 8301.143)
not only counts the sprocket holes but also checks each pocket to verify that the component is really inside.
In case of missing parts the machine can stop immediately after a desired consecutive missing component number (Stop Number is selectable from 0 to 9)
When the count ends the display shows both the number of detected components and the number of missing components.
As an additional benefit, the EPC option stops at the last components of the reel (SMD reels have about 400mm of tape leader without components).
This make it easy to rewind.NOTE: EPC option works only on black plastic tapes from 8 to 54mm of height.